The Domino printer switching power supply is not the same as the Domino printer A+ switching power supply. It cannot be used universally. The A+ power switch is relatively expensive at the price.
How to judge the damage of the Domino printer switching power supply :
The obvious feature of the switching power supply damage is that the coding machine automatically jumps and restarts. In addition, sometimes the screen flickers. There will also be ventilation failures. At this time, the possibility of switching power supply damage is very large.
How to replace the switching power supply of the Domino printer, the following operations need to take certain anti-static measures:
The first step is to turn off the power to the printer.
In the second step, the old switching power supply is connected to the connection on the external interface board, and the connection of the switching power supply to the main board is removed.
In the third step, loosen the hexagonal nut of the fixed switching power supply and remove the damaged switching power supply.
In the fourth step, install the new switching power supply to the fixed plus and tighten the hex nut.
In the fifth step, connect the switching power supply to the external interface board and the hosted cable.
In the sixth step, after checking the error, turn on the power to see if the fault is solved.
Post time: Nov-21-2018